![]() |
Hughes Concrete Lintels
Concrete lintels are used over doorways and windows to carry the wall above.
Hughes manufacture, supply and deliver a wide range of precast concrete lintels. Stocking a wide range of sizes and lengths to allow for quick turnaround and competitive pricing.
Reinforced Precast Concrete Lintels
The ‘dry-cast’ production technique used to manufacture reinforced lintels results in a high strength, low water/cement ratio mix. A variety of sections are available to suit different wall thicknesses. Unlike prestressed concrete lintels which ‘bow’, reinforced lintels are almost completely level on its top and underside.
Click to see Span Load Table – Lintels
Prestressed Concrete Lintels
Efficient design is achieved through the stressing of steel strand for reinforcement. This results in a lighter lintel with a high load bearing capacity. Particularly when used in composite action with the masonry wall above.
Click to see Span Load Table for Prestressed Lintels
Padstones
Padstones are stronger than a masonry block and distribute loads efficiently through adjoining blockwork. This reduces the potential for cracks and structural failure.
To discuss your requirements, contact our technical sales team today.
Download Information Brochure Here
Reinforced 6” x 4” LintelThis 150mm x 100mm lintel is available in lengths from 1’6″ to 13′ in 6″ increments. Ask our staff if this is the best product for your project. You may require 9″ x 4″ lintels where the wall is load bearing. |
![]() |
Reinforced 9” x 4” LintelThe 225mm x 100mm lintel is more commonly used in load bearing walls, especially where openings exceed 6′. They available in 6″ increments between 1’6″ and 13′ Our staff will advise where you would be required to place 9″ x 4″ in your project |
![]() |
Reinforced 9” x 6” LintelThese heavy lintels measure 225mm x 150mm, and are available in 6″ increments between 1’6″ and 13′ |
![]() |
Prestressed 9” x 4” LintelThe 225mm x 100mm prestressed lintels are available in increments of 6″ starting at 6′ long up to 12’6″, and also 13’9″ and 14’9″ |
![]() |
Prestressed 4” x 3” LintelThe lightest of our lintels, but prestressed nonetheless. 100mm x 75mm in width but only in lengths from 3′ – 8’6″ in increments of 6″ |
![]() |
Padstones (6″x4″ & 9″x4″)Spread the load with RC Padstones Padstones are stronger than a masonry block and distribute loads more efficiently through adjoining blockwork. Available in 6″ & 9″ depths, 18″ or 24″ long. We also stock 18″ long 9″ x 9″ padstones. |
![]() |