Wall caps are designed to protect the wall below from the rain and frost, as well as being aesthetically pleasing. Our Wall Caps come in 3 styles, mostly in 3′ lengths and in a number of widths.
Just like our Pier Caps, you should allow 3″ (1.5″ each side) in addition to the width of the wall you want to cap to allow for the drip edge on either side of the wall coping.
Download Information Brochure Here
Ballustrade Wall Caps
This wall cap has a flat top with curved sides. This is the most decorative finish we stock and they match many of our Pier caps. They can also be used where steel railings are installed.
Our most popular sizes are 9″ cap for a 6″ wall & 12″ cap for a 9″ wall
Plain Wall Copings
This traditional style saddle back wall cap slopes both sides from the centre of the cap.
The most common widths sold are 9″ and 12″, however, other sizes available include 7″, 13″, 16″ & 17.5″
Feather Edge Wall Caps
This wall cap has a simple slope from one side to the other, guiding rain water in one direction only. You can use this type of wall cap with Parapet walls, where water needs to be directed away from a flat roof etc.
Most commonly sold as 10″, 12″ and 13″, however, larger widths of 15.5″, 17.5″, 22″ and 24″ are available.
Several of our pier caps will be a good match for the wall caps, however you might want to decide on a pier cap before choosing the wall cap for your wall.
If you require any assistance in calculating what you need, or need any more information about Wall Caps or any other product, please contact our sales team on 004428 37568392